SPRAY TECHNICAL DATA ATO-35
AUTOMOTIVE
WAX & TAR REMOVER
Rust-Oleum Corporation Form: GDH-630
11 Hawthorn Parkway Phone: 877-385-8155 Rev: 010815
Vernon Hills, Illinois 60061 www.rustoleum.com
.DESCRIPTION AND USES .
Rust-Oleum
®
Wax & Tar Remover is an effective, fast-
acting remover for many automotive surfaces, including
metal, plastic and fiberglass. It should be used prior to
sanding to prolong the life of sandpaper and again after
sanding as a clean-up agent prior to applying top coats.
Wax & Tar Remover removes old wax build-up before re-
application of new wax to promote an even, mirror-like
finish. It is also great for removing grease, silicone
and road film.
.PRODUCTS .
SKU (32 oz. Quart) Description
2514757 Wax & Tar Remover
.PRODUCT APPLICATION .
APPLICATION
Protect hands with solvent-resistant gloves and eyes with
chemical splash goggles.
Saturate a clean, lint-free cloth with Wax & Tar Remover.
Thoroughly cover area to be cleaned. Apply to a small
area (3’ x 3’) at a time. Allow to stand as long as
possible without drying, normally 4 to 6 minutes. Wipe dry
with a clean, lint-free white cloth. Turn cloth frequently to
ensure a clean side contacts surface. Replace cloth as it
becomes damp and soiled to prevent re-depositing of
contaminants.
NOTE: This product may not be compatible with all
surfaces and all conditions surrounding application. Before
applying to any surface, always test product in a small,
inconspicuous area to ensure no damage will result. Do
not use on freshly painted surfaces. Ensure paint has
cured in accordance with paint manufacturer’s instructions.
When using between paint coats, always follow
manufacturer’s instructions regarding cure times.
Do not use on metal or plastic surfaces that are hot to the
touch. For best results, apply at temperatures between
65-90°F (18-32°C) and avoid direct sunlight or strong
breezes.
.PHYSICAL PROPERTIES .
Ethoxylated Alcohols and Water
Volatile Organic Compounds
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements
of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our
materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be
limited to replacement of defective materials. All technical information is subject to change without notice.
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels